BEST ACCESS SYSTEMS 45HM IDH Max Mortise Locks Especificaciones descargar pdf (Pagina 13)

Installation Instructions for 45HM IDH Max® Mortise Locks

BEST ACCESS SYSTEMS

a Division of Stanley Security Solutions, Inc.

Installation Instructions for 45HM IDH Max® Mortise Locks

Completing the installation at the door

18 Install core

(DEU/DEL and TDEU/TDEL only)

1 Insert the control key into the core and rotate the key

15 degrees to the right.

2 With the control key in the core, insert the core into

the cylinder.

3 Rotate the control key 15 degrees to the left and

withdraw the key.

Caution: The control key can be used to remove

cores and to access doors. Provide adequate

security for the control key.

19 Install access door

1 Making sure that the access door does not pinch

any wires, insert the tabs of the access door into its

mating slots and swing the door closed.

2 Use a T15 TORX bit driver to secure the access door

with the security screw. Tighten firmly.

Figure 18 Installing the core

Control key

Core

Inside of door

Figure 19 Installing the access door

Security scre

Tabs

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Sin comentarios

BEST ACCESS SYSTEMS 45HM IDH Max Mortise Locks Especificaciones Pagina 13